Dronetag DRI
$55.00
Dronetag DRI is the smallest and lightest device offering affordable Direct / Broadcast Remote capability to drone manufacturers or integrators. It offers a cost-effective, lightweight, and user-friendly option to manufacture remotely identifiable drones. With the Dronetag DRI solution, manufacturers are on a frictionless path toward the production launch of Standard Remote ID (US) and C-class (EU) drones.
DRI comes in two variations (please select your variant below):
- with a U.FL port for an external antenna (includes Bluetooth Wire antenna)
- with a built-in antenna
DRI with External U.FL Antenna port package contains:
- 1 × Dronetag DRI
- 1 × Cable 6-PIN GH to 6-PIN GH 10 cm
- 1 × Bluetooth Wire antenna
DRI with Built-in Antenna package contains:
- 1 × Dronetag DRI
- 1 × Cable 6-PIN GH to 6-PIN GH 10 cm
As an accessory to the DRI version with an External U.FL Antenna port, you can purchase a Bluetooth Tube Antenna with a U.FL connector. This optional antenna offers stronger performance than the Wire Antenna that is included in the package.
Searching for more details? Please check our help section for vital product information.
Taxes details: Upon entering your billing and shipping details within the United States, taxes will be automatically adjusted and will not be charged and displayed in the final step of the order process.
Why is there a limit for number of purchased devices? Please check details about Bulk Purchase limit.
Note: Delivery times may vary due to external factors. We appreciate your understanding and will strive to expedite delivery.
Manuals & guides available
We strongly recommend exploring our comprehensive website at help.dronetag.cz
Check product availability
Some of our items are currently on backorder, check the availability before you order
Be aware of cancellation fees
Orders are subject to cancellation fees, as outlined in our Terms and Conditions
DRI benefits:
-
Get Remote ID approved by FAA in a few days
-
Produce C-class certified drones as defined by EASA
-
Plug & Play for PX4 and Ardupilot FCs (e.g., Pixhawk Cube)
-
Works with any MAVlink or easily adjusts to any custom FCs
-
Mobile app for configuration, flight tracking and data collection
-
Most compact Remote ID solution on the market
Data sheet
- Remote ID types
- Direct (EU) / Broadcast (US)
- Short-range radio
- Bluetooth 2.4 GHz
- Sensors
- None, data read from flight controller
- Average current consumption
- 3 mA
- Maximum current consumption
- 10 mA
- Mounting
- M2 holes or double-sided tape
- Operating temperature
- -40 °C to 85 °C (-40 °F to 185 °F)
- Dimensions
- 22.5 × 16 × 5 mm (0.89 × 0.62 × 0.19 in)
- Weight
- With JST connectors 1.5 g (0.56 oz)
Without JST connectors 0.5 g (0.017 oz) - Indicators
- RGB LED to show the state
- Antenna
- Variant with internal or external one
- Antenna Connectors
- Optionally 1 × U.FL (IPEX compatible)
- Communication Connectors
- 2 × JST GH 6-pin (1.25 mm pitch)
- Communication Protocol
- UART (3.3 – 5 V tolerant)
- Supported Message Protocol
- MAVlink 2
- Supported baud rates
- Standard ones - configurable in Dronetag app
- Input voltage
- 3.3 – 17 V
- Input voltage regulator
- Low-noise buck converter
- Remote ID Standards
- ASD-STAN EN 4709-002 & ASTM F3411-22
- Certifications
- Uses FCC/CE approved radio module
- Remote ID technology
- Bluetooth 4.0 Legacy + 5.0 Long Range
You might also like
Dronetag DRI is the smallest and lightest device offering affordable Direct / Broadcast Remote capability to drone manufacturers or integrators. It offers a cost-effective, lightweight, and user-friendly option to manufacture remotely identifiable drones. With the Dronetag DRI solution, manufacturers are on a frictionless path toward the production launch of Standard Remote ID (US) and C-class (EU) drones.
DRI comes in two variations (please select your variant below):
- with a U.FL port for an external antenna (includes Bluetooth Wire antenna)
- with a built-in antenna
DRI with External U.FL Antenna port package contains:
- 1 × Dronetag DRI
- 1 × Cable 6-PIN GH to 6-PIN GH 10 cm
- 1 × Bluetooth Wire antenna
DRI with Built-in Antenna package contains:
- 1 × Dronetag DRI
- 1 × Cable 6-PIN GH to 6-PIN GH 10 cm
As an accessory to the DRI version with an External U.FL Antenna port, you can purchase a Bluetooth Tube Antenna with a U.FL connector. This optional antenna offers stronger performance than the Wire Antenna that is included in the package.
Searching for more details? Please check our help section for vital product information.
Taxes details: Upon entering your billing and shipping details within the United States, taxes will be automatically adjusted and will not be charged and displayed in the final step of the order process.
Why is there a limit for number of purchased devices? Please check details about Bulk Purchase limit.
Note: Delivery times may vary due to external factors. We appreciate your understanding and will strive to expedite delivery.